Three characteristics of using an infrared thermometer:
1. Infrared thermometer can quickly provide temperature measurement. Within the time of reading a leakage connection point with a thermocouple, the infrared thermometer can almost read the temperature of all connection points. In addition, due to the solid and lightweight nature of the infrared thermometer (Both are lighter than 10 ounces) and easy to put in a leather case when not in use. So you can carry it with you when you are in the factory for viewing and daily inspection work.
Another feature of infrared thermometers is that their accuracy is usually within 1 degree. This performance is particularly important when conducting preventive maintenance, such as monitoring harsh production conditions and special events that may cause equipment damage or shutdown, which is equivalent to reducing revenue. To prevent such losses, scan all on-site electronic devices - circuit breakers, transformers, fuses, switches, buses, and distribution panels - to find hotspots. Using an infrared thermometer can quickly detect small changes in operating temperature, solve problems at their inception, and reduce expenses and maintenance scope caused by equipment failures.
3. Safety is an important benefit of using infrared thermometers. Unlike contact thermometers, infrared thermometers can safely read target temperatures that are difficult to access or unreachable. You can read the target temperature within the range allowed by the instrument. Non contact temperature measurement can also be carried out in unsafe or difficult contact temperature measurement areas, such as near steam valves or heating furnaces, without the risk of accidentally burning fingers during contact temperature measurement. Measuring the temperature of the supply/return air outlet 25 feet above the head is as easy as measuring it at hand. Raytek infrared thermometers all have laser aiming for easy identification of target areas. With it, your work has become much easier.
