Use of a Mobile Gas Detector in a Chemical Plant
Portable gas detectors are the guarantee of staff safety and have been widely used in various industries. Any environment with flammable gas, toxic and harmful gas should choose a gas detector for detection to ensure safety. In particular, it is more important to detect the flammable gas or toxic gas and vapor content in the chemical workplace or the air inside the equipment. The security can achieve the effect of danger warning through sound and light alarms.
Portable gas detectors are mainly used in the following situations in chemical plants:
Maintenance test: After the equipment is repaired and replaced, it is more important to detect the residual harmful gas or liquid, especially before the fire.
Emergency detection: When abnormal conditions occur on the production site or accidents are handled, harmful gases or liquids should be detected for safety and sanitation.
Leak detection: Leakage detection and alarm for harmful gases or liquids in the equipment pipeline, and leak detection for equipment pipeline operation.
Tour inspection: during safety and sanitation inspection, harmful gas or liquid vapor should be detected.
Safety inspection: When workers enter the hazardous material isolation operation room, enter the sewer, cable trench or equipment for operation, they must detect harmful gases or liquid vapors.
How can the user prolong the service life of the gas alarm of the combustible gas detector?
First of all, we must pay attention to the storage of combustible gas detectors, and keep the location of the instrument in three non-high temperature, non-humid, and non-cold places. At the same time, we must ensure that the storage location of the instrument is clean, and it is not easy to store it in a dusty place for a long time. field of work.
Secondly, it is strictly forbidden to use the combustible gas detector by dropping it from a high altitude or being knocked by vibration. After a long time, it is easy to cause the built-in components of the instrument to become loose and unusable. Finally, ensure the cleanliness of the instrument. It is strictly forbidden to use a highly corrosive cleaning solution to clean the instrument. It is recommended to use a clean cotton ball dipped in a little water or soapy water to lightly wipe the instrument dry.
