Using a wood moisture meter in everyday life
Wood Moisture Meter
Microwave moisture measuring instrument (humidity meter) represents the development of product moisture measurement technology. Using measurement technology, moisture can be determined within 1 second. The accuracy of the measurement results is not affected by the particles, colors and any minerals contained in the product. Influence. It is made by using the principle that microwave energy is attenuated by being absorbed when passing through a substance. It can be used to measure the moisture of coal powder, oil or crops; check the humidity of grain depots; measure the moisture content of soil, fabrics, etc. and so on. For the conveyor control type of the production line, a continuous non-contact online microwave measuring instrument can be installed, as shown in the figure. At this time, the microwave antenna is installed on the measurement bracket on the production line. The transmitting antenna is installed under the belt, and the receiving antenna is installed on the belt. The density compensation measurement channel is installed before the microwave measurement channel, and the microwave rays pass through the material to be tested vertically.
Application field of wood moisture meter
Chemical industry, building materials, wood, paper, food, etc. This instrument can also be used in the laboratory as a determination of moisture content
Through simple contact, the moisture content of wood with a specific gravity between 300 and 1000kg/m³ can be measured without damaging the tested material.
The electromagnetic wave sensing technology of KT-50 can penetrate the wood to a depth of 50mm, and generate a three-dimensional magnetic field for on-site measurement. Therefore, it is an extremely accurate wood moisture meter.
KT-50 has an automatic shutdown after starting up, which can effectively save power and protect the instrument from long-term use.
KT-50 has a low battery voltage display, when LOBAT is displayed on the upper left corner of the display, it will remind the user to change the power supply.
