UV illuminance meter knowledge book
Characteristics of UV illuminance meter
1, machine multi-purpose, can measure the plane and light-guided light source, with the difference of the sensing components used.
2, can measure UVA, UVB, UVC different wavelength light source.
3, measurement of plane light source UVA up to 5,000 mw / c ㎡, UVC up to 2,000 mw / c ㎡.
4、Measurement of light tube light source up to 20,000 mw/c㎡.
5、According to the customer's demand, there are simple matching, full matching, and differently equipped with industry.
6、Measure the intensity of light source and the amount of light volume.
UV illuminance meter functions and advantages
1, UV illuminance meter is easy to use, a key to complete the ON/OFF and running operation.
2. UV illuminance meter easy to read data display screen, simultaneously display 4 bands:
Data from 4 bands on the UV Power Puck II can be shown on the display at the same time for quick reading by the operator. There is no need to switch to get 8 values, read at once. Soft keys are used for function selection and are indicated on the bottom of the display for easy operator selection and use.
3. Standard EIT multi-band:
UVA (320-390nm), UVB (280-320nm)
UVC (250-260nm), UVV (395-445nm)
4.UV illuminometer dynamic range:
Standard version - 10 Watt UVA, UVB, UVV; 1 Watt UVC. low power version - 100 mW.
5.UV illuminance meter setup function:
Provides user selectable meter modes for data analysis, comparison, screening and operational settings.
6.Reference Mode:
Used to compare readings. Useful during system installation and troubleshooting. The user can store a selected UV reading as a baseline or reference reading and compare it to another reading. The meter displays both readings and indicates the percentage change between the readings. Data is displayed in mJ/cm2, mW/cm2, and percentage.
7. UV illuminance meter graph mode:
The graphical mode displays the UV illuminance and energy collected for each UV band. The graphs are shown as illuminance changes over time. The graph shown on the right indicates a one-lamp or two-lamp curing system.
8. Optional sampling rate:
Smooth On Data: Compatible with previous Power Puck versions.
Smooth Off Data: Compatible with previous UV PowerMap over 2000 samples/second.
9. UV illuminance meter unit of measurement: The unit of measurement is user-selectable, making it easy for the operator to read. The data will be displayed as you need it. The units selected can be: mJ/cm2, mW/cm2, J/cm2, W/cm2, uJ/cm2, uW/cm2.
10. Colorful, easy-to-read display: low, medium and high intensity can be selected for graphical display.
11.UV illuminance meter communication port: UV energy meter and PC/PDA comply with serial communication protocol. Download collected data to a computer for statistical analysis and data logging, as well as process validation.
