What is an Inverter Regulated Power Supply
The so-called inverter stabilized power supply is also called a variable frequency power supply. This variable frequency power supply adopts a 16 bit Motorola processor control, high-frequency PWM design, and imported Mitsubishi 1GBT drive Efficiency reaches over 85%. Quick response, with a stable response time of less than 2ms for 100% unloading/loading. This variable frequency power supply has strong overload capacity and can withstand an instantaneous current of 300% of the rated current. The waveform is pure, the frequency is high and stable, and no interference magnetic waves (EMI, EMC) are generated. Variable frequency power supply is not only the best power supply for research and development, laboratories, and metrology rooms, but also the standard power supply for EM/EMC/safety testing.
The fourth category is switch mode stabilized power supply
Figure 1 shows the schematic diagram and equivalent schematic diagram of a switch mode stabilized power supply, which consists of a full wave rectifier, a switching transistor V, an excitation signal, a freewheeling diode Vp, an energy storage inductor, and a filtering capacitor C. In fact, the core part of a switching regulator power supply is a DC transformer.
There is also a type of CNC stabilized power supply:
Numerical Control Voltage Stabilized Power Supply: It compares and verifies the current voltage with the rated voltage by sampling at the output end of the device through the observation area. If the comparison is negative, the data is sent to the Central Processing Unit (CPU), which then issues a voltage increase command. At the same time, the detection area checks whether the semiconductor has been turned on or off. After confirming the accuracy, the central processing unit issues a command to apply voltage to control the operation of the semiconductor, thereby achieving the standard rated voltage. If the value is positive, the central processing unit will issue a command to reduce the voltage, and the entire process will be digitized in just 0.048 seconds.
Regarding regulated power supplies, Sanke has been operating in the industry for many years and is very familiar with this product. Moreover, the performance and technological content of the voltage regulators and power supplies from Sanke can achieve a very good reputation in the same industry. Years of technical experience and the trust and support of numerous users have enabled Sanke Power to develop and gradually mature in the field of voltage regulators for power supply boxes. San Ke believes that with the trust and support of both new and old customers. San Ke will surely shine in the same industry. Provide partners with higher quality and cheaper voltage regulators and power supplies.
