What should I be aware of when using a combustible gas detector for testing?
Combustible gas detector is an instrument used to detect the concentration of combustible gas in the air. It is widely used in petroleum, chemical, coal mining, shipping and other industries, as well as public places and other fields. But the use of combustible gas detector for testing needs to pay attention to some matters to ensure its safe and reliable operation. What should we do?
The use of combustible gas detector in the detection, need to pay attention to the following points:
1, to ensure that the sensor of the combustible gas detector and the detection of the area in full contact, to avoid errors in the measurement results.
2, in the sample detection, you need to insert the probe into the area to be detected, keep a certain time, so that the combustible gas detector to fully detect the combustible gas concentration in the air.
3, in real-time detection, you need to pay attention to the combustible gas detector display unit of measurement, generally LEL (Lower Explosive Limit) or PPM (Parts Per Million).
4, in the detection process, if the combustible gas concentration is found to exceed the safe range, corresponding measures should be taken immediately, such as ventilation, shut down the relevant equipment, etc., to ensure the safety of staff.
5、Finally, after using the combustible gas detector, you need to clean and store the instrument. Cleaning includes cleaning the probe, sensor and other parts of the instrument; storage refers to the instrument placed in a dry, ventilated place to avoid moisture, heat and so on.
Above on the use of combustible gas detector to detect the points to note for you to share here, in short, combustible gas detector is a very important safety testing instruments, the use of which need to be strictly in accordance with the use of methods of operation, to ensure the safety of staff.
