What to do when the composite gas detector leaks
In the process of using the composite gas detector, sometimes there will be leakage due to various reasons. If we do not take relevant measures when gas leakage occurs in the composite gas detector, it will definitely have a certain impact on the safety of use. So you know what to do when the composite gas detector leaks?
When the composite gas detector leaks, the following measures should be taken:
1. When the composite gas detector sends out an early warning and alarm, arrange for personnel to evacuate in time, and at the same time close the leakage valve, cut off the source of leakage, ventilate properly and use spray water for dissolution and dilution. At the same time, the diluted water should also enter the wastewater system for centralized treatment, and should not be directly discharged into the sewer to prevent secondary pollution.
2. When the composite gas detector leaks, adequate ventilation should be carried out for the leak site, and then special personnel should be arranged to inspect the site leak point after re-testing the site environment and ensuring safety, and carry out regular manual inspection after the valve is reopened. Patrol inspection and inspection, after confirming safety, personnel can be arranged to enter the on-site production operation.
3. After the conventional composite gas detector has been used for a long time, some work failures will also occur. If a dangerous gas leak occurs, the personnel in the leaked contaminated area should be quickly evacuated to the upper wind, and immediately isolated and strictly restricted from entering . Evacuate irrelevant personnel and establish a cordon zone. Cut off the fire source, cut off the leaking air source as much as possible, open all doors and windows, let it ventilate naturally, and accelerate the spread. If possible, use an exhaust fan to send the leaked gas to an open place or install a suitable nozzle to burn it.
To sum up, these are some treatment measures that should be taken when the composite gas detector leaks. Through these measures, we can better ensure the safety of the workers and the working environment.
