About calibration and maintenance of anemometer
1. It is prohibited to use anemometers in flammable gas environments.
2. It is prohibited to place the anemometer probe in flammable gases. Otherwise, it may lead to fire or even explosion.
3. Please use the anemometer correctly according to the instructions in the user manual. Improper use may result in electric shock, fire, and damage to sensors.
4. If the anemometer emits abnormal odors, sounds, or smoke during use, or if liquid flows into the interior of the anemometer, please immediately turn off the device and remove the battery. Otherwise, there is a risk of electric shock, fire, and damage to the anemometer.
5. Do not expose the probe and anemometer body to rain. Otherwise, there may be risks of electric shock, fire, and personal injury.
6. Do not touch the sensor area inside the probe.
When the anemometer is not in use for a long time, please remove the internal battery. Otherwise, the battery may leak and cause damage to the anemometer.
8. Do not place the anemometer in places with high temperature, high humidity, high dust, and direct sunlight. Otherwise, it will result in damage to internal components or deterioration of anemometer performance.
9. Do not use volatile liquids to wipe the anemometer. Otherwise, it may cause deformation and discoloration of the anemometer housing. When there are stains on the surface of the anemometer, a soft fabric and neutral detergent can be used to wipe it off.
10. Do not drop or heavily press the anemometer. Otherwise, it will cause malfunction or damage to the anemometer.
11. Do not touch the sensor part of the probe when the anemometer is charged. Otherwise, it will affect the measurement results or cause damage to the internal circuit of the anemometer.
