Advantages and disadvantages of semiconductor sensors in gas detection instruments
It is manufactured using the principle that the conductivity of some metal oxide semiconductor materials changes with the composition of the ambient gas at a certain temperature. For example, an alcohol sensor is prepared based on the principle that when tin dioxide encounters alcohol gas at high temperatures, its resistance will sharply decrease.
advantage
Semiconductor gas sensors can be effectively used for detecting many gases such as methane, ethane, propane, butane, alcohol, formaldehyde, carbon monoxide, carbon dioxide, ethylene, acetylene, vinyl chloride, styrene, acrylic acid, etc. Especially, this type of sensor is low-cost and suitable for the needs of civilian gas detection. The following semiconductor gas sensors are successful: methane (natural gas, biogas), alcohol, carbon monoxide (city gas), hydrogen sulfide, ammonia (including amines and hydrazine). High quality sensors can meet the needs of industrial testing. Industrial Scientific, American gas sensor
disadvantage
Poor stability and significant environmental impact; Especially, the selectivity of each sensor is not the same, and the output parameters cannot be determined. Therefore, it is not suitable for places that require accurate measurement.
Combustion type
This type of sensor is prepared with a high-temperature resistant catalyst layer on the surface of a platinum resistor. At a certain temperature, combustible gases catalyze combustion on its surface. Combustion is a function of the concentration of combustible gases as the temperature of the platinum resistor increases and the resistance changes.
advantage
Catalytic combustion gas sensors selectively detect combustible gases: anything that cannot be burned has no response from the sensor. Catalytic combustion gas sensors have accurate measurement, fast response, and long lifespan. The output of sensors is directly related to the explosion hazard of the environment and is a dominant type of sensor in the field of detection.
disadvantage
Within the range of flammable gases, there is no selectivity. Working in a dark environment poses a risk of ignition and explosion. Most organic vapors have a toxic effect on sensors.
