Do you know the installation standards and basis of combustible gas detectors?
A combustible gas detector is a detector that responds to a single or multiple combustible gas concentrations. The smart sensor transmitter used in the detector is a fully functional combustible gas sensor transmitter. This intelligent sensor transmitter uses MicroSafe software technology. Use the interference-free operation interface. All operations are menu-driven and can be performed via a hand-held magnetic programming tool. Flexible options are provided in the system establishment. The standard output includes 4-20mA output, RS-485 communication interface and 3 alarm relays. The signal transmission module of the sensor transmitter is plug-in, which is convenient for on-site maintenance.
Installation standards and basis of combustible gas detector:
1) Article 10.3.2 of GBJ16-87 "Code for Fire Protection of Architectural Design" (Revised in 2001): Class A workshops and places that emit flammable gas and flammable vapor should be equipped with a flammable gas concentration leak detection alarm device.
2) Article 4.6.11 of GB50160-92 "Code for Design of Fire Protection of Petrochemical Enterprises" (Revised in 1999): In devices that use or generate Class A gas or Class A and Class B liquids, it is advisable to combine regional control and key control. The principle of setting combustible gas alarm probe.
3) Article 5.1.4 of GB50160-92 "Code for Design of Fire Protection of Petrochemical Enterprises" (Revised in 1999): In places where Class A gases and liquids may leak, flammable gas alarms should be installed.
Some flammable gases are spread into the environment and we cannot detect them, especially when a small amount exists, it can be detected by a flammable gas detector, and emergency measures can be taken to improve the safety performance of the working environment and avoid some accidents. Although many people know that there are unsafe factors in their working environment, there are only a few people who can keep their safety awareness in mind at all times. Only when everyone enhances their safety awareness and keeps safety in mind can they truly do a good job in safety.
