Features of analogue oscilloscopes Technical parameters of analogue oscilloscopes
Analogue oscilloscopes in short, analogue oscilloscopes for engineers and technicians to provide the waveforms to see for themselves, in the specified bandwidth can be very assured that the test, the five human senses in the eye vision is very sensitive, the screen waveforms instantly reflected to the brain to make a judgement, the slightest change can be perceived. Therefore, analogue oscilloscopes are very popular among users.
Analogue oscilloscope features
1, RS-232 interface (only for parameter query and control);
2, Automatic amplitude, frequency (up to 100MHz) and period measurement;
3, Trigger in the range of 0-100MHz (from 5mm signal level);
4, High X amplification of any part of the signal by time base delay;
5, Horizontal time base of 0.5s-50ns/gram (X amplification up to 10ns);
6, can be displayed at up to 1 million signals per second at optimum analogue quality;
7, dual-channel, vertical scale of 1mV-20V/gram, low noise;
Analogue oscilloscope technical parameters
Operating modes: channel I or II only, channel I and II (alternating or intermittent), channel I and II sum or difference
Reverse: channel II
XY mode: channel I (X) and channel II (Y)
Bandwidth: 2 x 0-50MHz (-3dB)
Rise time: <7ns
Overshoot: 1% max
Vertical accuracy: 1-2-5 steps
1mV/gram-2mV/gram: ±5% [0-10MHz(-3dB)
5mV/gram-20V/gram: ±3% (0-50MHz(-3dB))
Variable (Uncertain): >2.5% (1 to >50V/gram)
Input Impedance: 1MΩ||18pF
Input Coupling: DC, AC, GND (Ground)
Maximum Input Voltage: 400V (DC + AC peak)
Trigger
Auto mode (peak-to-peak): 20Hz-100MHz (≥5mm)
Normal mode (with level control): 0-100MHz (≥5mm)
Slope: Rising or falling edge
Trigger source: Channel I or II, Channel I/Channel II alternating (≥8mm),: D14-36Y, 8 x 10 cells with crosshairs
Acceleration voltage: approx. 2kV
Track rotation: Adjustable on front panel
Z input (intensity modulation): max. +5V (TTL)
Calibration signal (square wave): 0.2V±1%, 1Hz-1MHz (tr<4ns), DC
Power supply (AC): 105-253V, 50/60Hz±10%, CATII
Power consumption: approx. 34W (at 230V/50Hz)
Ambient temperature: 0°C... +40°C
Safety class: Safety class I (EN61010-1)
