Function and characteristics of combustible gas detector
Product Features of Portable Combustible Gas Detector
1. High and low alarm points can be set, two-level alarm, alarm category displayed on the screen, two-level triple alarm (sound, light, vibration), not easy to ignore
2. Sensor high concentration protection function
3. Provide real-time clock display function
4. Automatic calibration function to reduce measurement error
5. Power-on self-test function
6. Password management function, important operations require password verification, effectively preventing misuse
Combustible gas detector features
-With its own suction pump, it can suck gas into the instrument from a distance of tens of meters for measurement
-Audible alarm
-Large screen digital, character display, instantaneous value, peak value display
-Self-inspection of display, battery, sensor, sound and light alarm function when starting up or when needed
-Safety tips: regular flashing lights, sound prompts
- Superior audio sound alarm
- Equipped with a charger, easy to carry and flexible to use
- Very low maintenance
Combustible gas detector maintenance
In order to detect combustible gas information, the combustible gas detector must communicate with the detection environment. Therefore, it is unavoidable for various polluting gases and dust in the environment to enter the detector, which will affect the working conditions of the detector. Damage is an objective existence. The working environment of combustible gas detectors is relatively harsh, and many are installed outdoors. Poor maintenance will lead to errors or non-detection of combustible gas alarms. Therefore, regular cleaning and maintenance of combustible gas detectors is an important task to prevent failures.
The grounding should be checked regularly. If the grounding does not meet the standard requirements, or is not grounded at all, it will also make the flammable gas detector susceptible to electromagnetic interference and cause failure. Prevent components from aging. From the perspective of reliability, at the same time, practice has proved that the failures caused by component aging tend to increase in the system of flammable gas detectors with a service period of more than 10 years. Therefore, if the service period exceeds the requirements of the use regulations, it should be replaced in time.
