Functional characteristics and application range of leakage current clamp
Product introduction:
The true RMS leakage current measurement multimeter is specially used to measure the leakage current of the ground wire. You can choose 60mA or 600mA range for measurement. The special clamp structure and anti-interference design allow the test probe to achieve higher sensitivity (10μA and 100μA). When testing small currents, it is also very important to isolate external noise, which can make your measurement more accurate and reliable.
100A RMS, AC/DC voltage, resistance and continuity can be measured with clamp meter (with buzzer)
The ergonomic design allows you to easily operate with one hand. The diameter of the jaw is 28mm, which is designed according to the size of the most common grounding wire.
Features:
• Fast measurement of leakage current
• Live working to detect insulation faults
• RMS current can be measured up to 100A
• Maximum measuring voltage 600V AC/DC
• Frequency measurement (voltage or current input available)
• Resistance and continuity measurements
• Measured value Hold function
• The MAX button function can track and capture the maximum starting current value
• ZERO key function helps you measure relative values
• Can filter and isolate 50/60Hz fundamental wave among harmonics
Applications:
• Earth fault current measurement
• Electrical safety testing
• Medical device safety testing
• Process Monitoring
• General AC load monitoring
• Industrial troubleshooting
