How to use wood moisture analyzer
1. Gear setting method: first press the gear setting button (SPECIES), and then press the test button (TEST). At this time, the current gear value is displayed. Press the setting button continuously to change the gear continuously until needed. stalls.
2. Check before measurement: Set to level 5 according to the above method, then pull out the cap of the instrument, touch the probe on the instrument to the two contacts on the cap, press the test key, if the display is 18±1, it means The instrument is normal.
3 Measurement: Insert the probe on the instrument into the wood specimen to be measured. Press the test button, the value displayed by the instrument is the average moisture content of the specimen, when the moisture content of the specimen is less than 3, it will display 3.0, and when the moisture content of the specimen is greater than 40, it will display 40, which means it has exceeded the range.
