Introduction to Maintenance and Care of Optical Microscopes
1. Daily maintenance and upkeep
(1) Moisture resistant optical lenses are prone to mold and fog. Mechanical parts are prone to rusting when exposed to moisture. 1-2 bags of silicone gel should be placed inside the microscope box as a desiccant.
(2) Dust falling onto the surface of dust-proof optical components not only affects the passage of light, but also generates large stains after amplification by the optical system, which affects observation. Dust and sand particles falling into the mechanical parts can also increase wear and tear, causing movement obstruction and posing significant hazards. Pay attention to keeping the microscope clean.
(3) Anti corrosion microscopes cannot be placed together with corrosive chemical reagents. Such as sulfuric acid, hydrochloric acid, strong bases, etc.
(4) Prevent thermal expansion and contraction that may cause the lens to peel and detach. Therefore, biological microscopes should be placed in a dry, cool, dust-free, and non corrosive place. After use, it should be wiped clean immediately and covered with a dust-proof breathable cover or placed in a box. When the microscope is idle, cover it with a plastic cover and store it in a dry place to prevent dust and mold. Store the objective lens and eyepiece in a container such as a dryer, and protect them from desiccants.
2. Maintenance and upkeep of mechanical systems. Sliding parts: Regularly apply neutral grease, paint, and clean plastic surfaces. Stubborn stains can be cleaned with a soft cleaning agent, and it is recommended to use a silicone cloth. Plastic part: Dip a soft cloth in water to clean it. Caution: Do not use organic solvents (such as alcohol, diluents, etc.). Because it can corrode machinery and paint, causing damage.
3. The maintenance of the optical system involves cleaning the lens. After use, gently wipe the eyepiece and objective lens with a clean and soft silk cloth. The spotlight and reflector just need to be wiped clean. If there are stubborn stains, you can use long fiber degreasing cotton or clean fine cotton cloth dipped in less formaldehyde or lens cleaning solution to wipe them off, then dry them with a clean and soft silk cloth or blow dry with a hair dryer.
