Maintenance precautions for portable combustible gas detectors.
Try to avoid charging for a long time at once in daily life. When charging, the detector should be turned off to reduce charging time and extend its lifespan. Due to charging the detector while it is turned on, the sensor of the instrument may be affected by the charger, resulting in sudden alarms or incorrect gas detection.
Secondly, avoid contact with water sources (products with higher protection levels should also be avoided)
In daily life, many operators use damp cloths to wipe the screen or external casing of combustible gas detectors, which is a violation of maintenance regulations. Once moisture or water vapor enters the detector, it will damage the detector circuit and affect the alarm accuracy; Similarly, combustible gas detectors should not come into contact with corrosive substances, as this can cause certain damage to the detector.
Thirdly, pay attention to regularly charging when idle
The frequency of using combustible gas detectors in many places is low, and the instruments are left idle in daily life, which not only fails to maintain them but also reduces their lifespan; The detector should be charged every 2 to 3 months when it is idle to protect the normal lifespan of the battery.
Fourth, prevent frequent collisions and falls
In daily life, it is necessary to place the combustible gas detector in a safe location. When testing in special places, the location should also be selected before testing. Although the external casing of the detector has the ability to resist external forces, frequent collisions, impacts, or drops can reduce the accuracy of the detector and cause irreversible damage.
The above are some precautions for daily maintenance of high-quality combustible gas detectors.
In addition, it is advisable not to place this type of equipment in high concentration combustible gases for detection. When starting up, it should be operated in an environment where the gas indicators are normal. After starting up, it should be taken to the detection site for gas detection after initialization is completed. Daily maintenance is crucial as it directly determines its service life.
