Moisture meter classification and use range
Physical analysis method of moisture meter including: infrared moisture meter, halogen moisture meter, microwave moisture meter, needle type, inductive type.
Infrared (halogen) moisture tester is simple to operate, less time-consuming, accurate measurement results, so the infrared moisture meter can be widely used in all the need for rapid determination of moisture in the industry, such as medicine, food, feed, seeds, rapeseed, dehydrated vegetables, tobacco, chemical, tea, food, meat and textile, agriculture, forestry, papermaking, rubber, plastics, textiles and other industries in the laboratory and production process. Microwave moisture tester using microwave field drying samples, accelerate the drying process, with short measurement time, easy to operate, high accuracy, suitable for petroleum, paraffin and other liquid specimens in the moisture determination
Needle-type moisture meter is the use of the conductivity of the object to be measured to carry out moisture measurement, the higher the moisture content, the greater the corresponding conductivity, through the measurement of the conductivity of the object to be measured can be measured moisture value.
Inductive moisture meter is a microwave moisture meter, moisture content is high, the measured object's dielectric constant is large, the corresponding equivalent capacitance also becomes large. By measuring the equivalent capacitance of the object under test, the moisture value can be measured.
Rapid Moisture Meter [Instrument Introduction]: Rapid Moisture Meter, designed using the principle of pyrolysis weight, is a new type of rapid moisture detection instrument. Moisture tester in the measurement of sample weight at the same time, infrared heating unit and moisture evaporation channel rapid drying samples, in the drying process, the moisture meter continues to measure and instantly display the sample loss of moisture content %, drying procedures are completed, the final determination of the moisture content value is locked display. Compared with the international oven heating method, infrared heating can reach the maximum heating power in the shortest time, the sample is quickly dried at high temperature, the test results and the national standard oven method has good consistency, with alternative, and the detection efficiency is much higher than the oven method. General samples only need a few minutes to complete the determination. The instrument is easy to operate, accurate testing, the display part of the red digital tube, the value is clearly visible, respectively, can display the moisture value, the initial value of the sample, the final value, the determination time, the initial value of the temperature, the final value and other data, and has a computer, printer connection function.
The moisture meter can be widely used in all the need for rapid determination of moisture in the industry, such as medicine, food, feed, seeds, rapeseed, dehydrated vegetables, tobacco, chemical industry, tea, food, meat, and textile, agriculture and forestry, papermaking, rubber, plastics, textiles and other industries in the laboratory and production process.
