Occasionally, what size electric soldering iron is generally used to repair electrical appliances at home
The electric soldering iron is an essential tool for daily maintenance, electronic DIY, and some hand-made. In fact, there are many models of electric soldering irons to choose from. Here are a few better recommendations, and at the same time introduce the precautions for use.
Introduction of electric soldering iron
The electric soldering iron is mainly composed of a soldering iron head, a heating core, a handle, a power cord, and a transformer (the soldering station has a transformer). According to the mechanical structure, the electric soldering iron can be divided into two categories: internal heating type and external heating type. If you want to say which of them is better, It can only be said that both of them have their own advantages and disadvantages, and each has its own uses.
what is called internal heating
The soldering iron tip of the internal heating type electric soldering iron is hollow, which should be known to those who have used it. Because the internal heating type soldering iron is unique in structure, its heating core is directly inserted into the interior of the hollow soldering iron tip, so the name given to it is also called the internal heating type electric soldering iron. The power of internal heating electric soldering iron is generally relatively small, generally below 60W.
Why is it called external heating
The soldering iron tip of the external heating electric soldering iron is solid, and its heating core directly wraps the solid soldering iron tip, so it is called an external heating electric soldering iron. The power of the external heating electric soldering iron is generally relatively large, and the volume is also relatively large, and many of them can reach more than 60W.
The external heating type electric soldering iron is cheaper, but the heat generation is slower, and generally it cannot be adjusted and kept at a constant temperature. Although this kind of soldering iron is cheap, it is not very good in actual use. Because its soldering iron tip is very easy to oxidize, the oxidized soldering iron tip is basically useless. In addition, it is relatively large, and some soldering is not very convenient, so the external heating electric soldering iron is no longer recommended here, and the internal heating electric soldering iron is directly recommended.
1. Unplug the electric soldering iron in time after use
After many people use up the soldering iron, they still keep the soldering iron in a state of electric heating. At this time, the tip of the soldering iron is in a state of high temperature heating, and it is easy to be oxidized. Once the tip of the soldering iron is oxidized, it will be more difficult to use it next time. Therefore, it is necessary to unplug the electric soldering iron plug in time during use.
2. Tin plating on the tip of the soldering iron
I don't know if you have the habit of tinning, but the author always maintains a habit of tinning. Because after using the soldering iron, if the soldering iron tip is not tinned, the soldering iron tip will be oxidized due to high temperature, and some will turn black directly, which will affect the normal use of the soldering iron next time.
3. Do not use acidic flux
In order to make welding more convenient, some users will use some flux. Most of these fluxes are acidic, and the corrosion of the soldering iron tip is very serious under high temperature conditions.
The best flux is rosin, and the flux of rosin should be fully utilized. Rosin can be ground into powder and mixed with alcohol. They can be used as flux and the effect is very good. (25% rosin dissolved in 75% alcohol)
4. Solder selection
You get what you pay for, you can't go wrong at all. Buying a good solder wire can not only solder quickly, but also better for the tip of the soldering iron. However, some not-so-good solder wires are prone to uneven solder joints, burrs, and weak solder joints.
