Portable composite gas detector selection attention
Gas detector can be divided into a single detector composite gas detector, the so-called composite gas detector is an instrument to monitor two or more gases at the same time. From the cost considerations, compound gas detector than several single gas detector total cost is much more economical, so now more and more users choose it. Features are as follows: humidity sensor probe , , stainless steel heater PT100 sensor , , cast aluminium heater , heating coil fluid solenoid valve
1, because this detector can be equipped with multiple gas detection sensors required in a host, so it has a small size, light weight, corresponding to the fast, simultaneous multi-gas concentration display characteristics.
2, it should be noted that in the selection of this type of detector, * good choice with a separate switch for each sensor function of the instrument, in order to prevent damage due to a sensor affects the use of other sensors.
3, in the choice of pump suction composite gas detector should pay more attention in order to avoid blocking the suction pump due to water and other situations occur, choose the intelligent pump design with a stop pump alarm instrument is also safer.
The importance of combustible gas detector maintenance
As the working environment of the combustible gas detector is relatively harsh, generally need to be installed in the outdoors, outdoors will often be subjected to some of the wind and sun, and it is surrounded by a variety of contaminated gases, these gases will also enter the detector inside, and this can not be avoided, we can regard this as an objective way of damage. These damages will bring a certain impact on our data, in order to better play his value, we need to pay special attention to the maintenance and maintenance, will make the combustible gas detector may be hindered by the situation to minimise, so as to ensure that the detection of the correct value of the data, so the combustible gas detector cleaning and maintenance is very important, is an important measure of protection.
Of course, if you do not often on the combustible gas detector maintenance, it will also increase the speed of its aging, for enterprises, the cost of loss of industrial equipment is also very large. Enterprises must bear in mind that after a period of time must not forget to replace the equipment, so as not to cause business losses.
