Precautions for Stereomicroscope
1. The temperature of the installation location of the microscope shall be between 0° and 40°, and the relative temperature＜85[%].
2,The stereo microscope should be installed in a place where it will not be disturbed by vibration.
3,The microscope should be installed in a clean and dust-free place.
4,This microscope is a precision optical instrument, please protect it carefully from impact and vibration, if it is subjected to impact and vibration during handling or operation or treated rudely, it will be easy to make the instrument damaged.
5,Don't let the lens accumulate dust and leave fingerprints. Smudges on the lens will seriously affect the observation of the image. When the lens accumulates dust, it should be cleaned in the following way:
6, blow off with a dust blower. If you can not blow clean, you can try a soft brush gently brush erase.
7, only when the lens accumulated fingerprints or oil stains, only need to use a slight point of anhydrous alcohol clean soft cotton cloth gently wipe off the stains. Do not reuse the same part of the cotton cloth.
8, in the process of using the microscope, be sure to gently hold and put down, and be careful not to touch any optical part with your hands.
9, Any optical part should be wiped with special wiping paper.
10, any knob rotation difficulties, never use too much force, but should check the cause, remove obstacles.
11, the microscope should be stored in low humidity and should not cause mouldy place, the microscope should not be stored in the place that will be directly exposed to the sun and high temperature and high humidity. During the collection period, it is advisable to wrap the whole equipment with plastic cloth to prevent the accumulation of dust.
