Precautions for use of the five-in-one gas detector
The five-in-one gas detector MP400S can support the detection of VOC, combustible gases, oxygen, organic gases, carbon dioxide and other toxic gases. It can support a variety of sensors for free selection. The optional Senbe Suite software will bring users the most user-friendly and flexible wireless detection experience, which can provide continuous detection and provide decision-makers with faster response time and Make scientific decisions to reduce unnecessary losses. The five-in-one gas detector MP400S has a built-in sampling pump. It can be widely used in environmental protection, metallurgy, petroleum and petrochemical, chemical industry, fire protection, safety supervision, municipal administration, sewage treatment and other industries.
Generally when selecting a five-in-one gas detector, many users will encounter the problem of not knowing which four gases the five-in-one gas detector detects? How to select the type? In fact, first of all, the five-in-one gas detector refers to Detect five gases at the same time, but which five gases are they? Many non-technical users will encounter confusing problems in this selection. Secondly, there are dozens or thousands of gases that are routinely detected, and the safety range of each gas is different. Other special gases can also be selected according to their actual conditions.
Precautions for using the five-in-one gas detector
1. Gas interference on instrument detection. When detecting gas leaks, a single gas detector is usually used to detect a specific gas. However, there is often more than one gas in the detection environment, so it is necessary to pay attention to whether other gases will interfere with the instrument. The detection causes interference and makes the detection results inaccurate.
2. Generally, we should pay attention to the service life of the five-in-one gas detection instrument. Different gas detectors have different service lifes. When purchasing, you should ask about the service life of the instrument and use it within the warranty period. In order to save costs, some companies will The detector is not replaced after several years of use, and the gas detection is only for show, eventually causing some gas leakage safety accidents.
3. Secondly, attention should be paid to the maintenance of the five-in-one gas detector. The gas detector, like other equipment, should also pay attention to regular maintenance. It should be calibrated and tested from time to time, and should be stored in a lower temperature environment for extended periods of time. its service life.
4. Operators should pay attention to the concentration range detected by the gas detector. Before detection, in addition to estimating the types of toxic and harmful gases based on experience in advance, they should also roughly estimate the gas concentration and set the alarm value through the gas detector for detection. When the gas concentration exceeds the detection range of the instrument, the detector must be turned off. Leaving the gas detector in an over-range detection state for a long time will cause serious damage to the instrument.
