Precautions when using the five-in-one gas detector
The five-in-one gas detector MP400S can support the detection of VOC, combustible gas, oxygen, organic gas, carbon dioxide and other toxic gases. It can support a variety of sensors for free selection. The optional Senbe Suite software will bring users the most friendly and flexible wireless detection experience, which can continuously detect and provide decision makers with faster response time and Scientific decision to reduce unnecessary losses. The five-in-one gas detector MP400S has a built-in sampling pump. Can be widely used in environmental protection, metallurgy, petroleum and petrochemical, chemical, fire protection, safety supervision, municipal, sewage treatment and other industries.
Generally, in the selection of the five-in-one gas detector, many users will encounter that they do not know which four gases the five-in-one gas detector detects? How to choose the type, in fact, first of all, the five-in-one gas detector refers to the Detect five gases at the same time, but which five gases are they? Many non-professional users will encounter confusion in this selection. Secondly, there are dozens or thousands of gases that are routinely detected, and the safety range of each gas is different. Specific other special gases can also be selected according to their actual conditions.
Notes on the use of five-in-one gas detector
1. Gas interference to instrument detection. When detecting gas leaks, a single gas detector is usually used to detect a specific gas, but there is often more than one gas in the detection environment, so pay attention to whether other gases will affect the instrument. Interference caused by the detection makes the detection results inaccurate.
2. Generally, it is necessary to pay attention to the service life of the five-in-one gas detection instrument. The service life of different gas detectors is different. When purchasing, you should ask about the service life of the instrument and use it within the warranty period. The detector has been used for several years without replacement, and the gas detection is only for show, which eventually leads to some gas leakage safety accidents.
3. Second, pay attention to the maintenance of the five-in-one gas detector. Like other equipment, the gas detector should also pay attention to regular maintenance. It should be calibrated and tested from time to time, stored in a lower temperature environment, and prolonged its service life.
4. The reader should pay attention to the concentration range detected by the gas detector. Before the detection, in addition to estimating the types of toxic and harmful gases based on experience in advance, it is also necessary to roughly estimate the gas concentration, and set the alarm value for detection through the gas detector. When the gas concentration exceeds the detection range of the instrument, the detector should be turned off. If the gas detector is in the over-range detection state for a long time, it will cause serious damage to the instrument.
