Requirements for microscope illumination source color when observing details
Requirements for microscope illumination source color when observing details
When observing the details of an object, the magnification is generally larger, which requires a relatively bright light source. In terms of color, if the color of the place being observed is similar to that of the surroundings, it is better that the color of the light source is similar or the same as the color of the object being observed, so that you can see clearly. If the color of the place being observed is different from the surroundings, try to use a light source with a color similar to or the same color as the place being observed.
Microscope horizontal observation
In the electronics industry, it is necessary to detect the pins of circuit boards to see whether they are flush and whether the solder corners are flat. This requires an instrument that can observe in the horizontal direction. Our solution to this problem is to use the horizontal stand of the monocular microscope to place the monocular microscope horizontally, thereby achieving horizontal observation. This bracket has a host with a vertical adjustment stroke of 55mm, an XY platform with a stroke of 72×30.5mm, and a base specification of 387×267×27mm.
LED lighting and arrangement
LED lighting has a flexible arrangement that can achieve high-density light output. The central area of the lighting source is highly concentrated and bright, producing vivid and lifelike images. The product has a fast response time, reaching maximum brightness in 10 microseconds or less. Ultra low power consumption. The use of wide-band voltage can meet the needs of different power supplies and has a long service life.
The significance of LED zoned multi-angle lighting
When LED partitioned multi-angle lighting is used for microscope observation, it solves the purpose of observing the object being observed from multiple angles. For example, in the process of three-dimensional observation, multiple sides of the component must be observed by rotating the observation head. At this time, if coaxial light is used, the side cannot be seen clearly, and the observation effect is poor on the concave side; if an external cold light source is used, the angle of the light direction needs to be changed, which is very troublesome to operate. In this case, it is just right to use zoned multi-angle lighting LED light sources.
Observing small objects requires a high-magnification microscope, and a solution when focusing is required
When observing small objects, using an ordinary microscope may cause insufficient magnification. In this case, you can use our MZ single-tube continuous zoom microscope. Its main body zoom range is from 0.7X to 4.5X, 2.0X With the objective lens and 2.0X eyepiece, under the 14" monitor and 1/3" CCD camera, the total magnification can reach 1080X. In addition, when observing small objects, the focusing accuracy of ordinary brackets cannot meet the requirements. In this case, our fine-tuning guide rail bracket is needed, with a fine adjustment of 0.56mm/turn, which can meet the need for focusing when observing small objects.
