+86-18822802390

Several Essential Precautions to Know When Using Gas Detectors

Jan 31, 2026

Several Essential Precautions to Know When Using Gas Detectors

 

1. Daily calibration and testing
Gas detectors generally use calibration methods to detect gas concentration: before leaving the factory, the instrument is calibrated with a zero concentration gas and one or more standard concentrations of gas, and the calibration parameters obtained are stored inside the instrument. When the instrument is working normally, the sensors inside the instrument will generate a fixed signal based on the current gas concentration, and the accurate gas concentration value can be calculated through the calibration parameters that previously existed inside the instrument. Therefore, frequent zeroing and calibration of instruments are essential tasks to ensure accurate measurement

 

2. Interference of different gases on sensor detection
Under normal circumstances, each sensor corresponds to a specific detection gas, but any gas detector cannot respond to only one gas. Therefore, when choosing a gas sensor, it is important to understand as much as possible the detection interference of other gases on the sensor to ensure accurate detection of specific gases.

 

3. The lifespan of sensors

All types of gas sensors have a certain service life, that is, lifespan. Generally speaking, in portable instruments, combustible gas (LEL) sensors have a longer lifespan and can be used for about three years; The lifespan of a photoionization (PID) detector is four years or longer; The lifespan of electrochemical (CLE) specific gas sensors is relatively short, typically between one to two years; The lifespan of oxygen sensors is the shortest, about one year. The lifespan of electrochemical (CLE) sensors depends on the drying of the electrolyte, so if they are not used for a long time, sealing them in a lower temperature environment can extend their service life to a certain extent. Fixed instruments have a relatively large volume and longer sensor lifespan. Therefore, sensors should be regularly tested and used within their effective period as much as possible. Once they fail, they need to be replaced in a timely manner.

 

4. The concentration measurement range of the detection instrument
All types of toxic and harmful gas detectors have their fixed detection range. Only by completing measurements within its normal concentration range can the accuracy of instrument measurements be guaranteed. However, measuring beyond the measurement range for a long time may cause permanent damage to the sensor. For example, a combustible gas (LEL) detector may completely burn out the sensor if used in an environment with more than 100% LEL. Toxic gas detectors, when used at high concentrations for extended periods of time, can also cause damage.

 

In short, toxic and harmful gas detectors are powerful tools for ensuring industrial safety and the health of workers. Users should choose a suitable gas detector based on their specific usage environment and required functions.

 

gas leak detector -

Send Inquiry