Structural composition of laser thickness gauge
The laser thickness gauge is a high-tech and practical device developed in recent years. It is a non-contact measuring device used for online continuous measurement of finished product thickness on the plate production line. This article mainly introduces the application of laser thickness gauge.
Laser thickness gauge:
The measurement of the laser thickness gauge is completed by the upper and lower laser probes. The raw data measured by the laser probes are transmitted to the control box for processing and calculation. The control box is equipped with circuit systems such as the laser probe driver, synchronization circuit, and alarm control circuit. An LCD display is set on the slope of the control box, and the measurement results are displayed directly on the display.
In addition, if the board to be tested is wider, measuring points can be added on the C-shaped frame for multi-point measurement. During multi-point measurement, the control box not only displays the real-time thickness of each measurement point, but also displays the average thickness of several measurement points. It has a very intuitive monitoring effect on the sheet processing technology. When the number of measurement points is more than 3, the control box will not be able to meet the control and calculation requirements. A control cabinet and industrial computer are required to complete the control and calculation functions of the thickness gauge. The measurement results will be displayed on the display connected to the control cabinet. .
The laser thickness gauge effectively improves the working environment. It has the advantages of accurate measurement, high precision, good practicability, safety and reliability, no radiation, non-contact measurement and other manual measurements and other measurement methods, and is the ideal tool for rolling plate thickness. Control provides accurate information, thereby improving production efficiency and product quality, and reducing labor intensity.
