Temperature setting of digital thermostatic stage of microscope
The digital constant temperature stage is a small constant temperature equipment produced according to the needs of universities, research institutions, hospitals, and animal husbandry, which is durable and corrosion-resistant. Especially in animal husbandry, when conducting artificial insemination, multiple glass pieces can be placed on top for insulation, which will not freeze the sperm to death and improve the accuracy of the experiment.
Due to the use of low-power heating, this instrument takes a long time to heat up. It takes approximately 10-30 minutes to initially heat up to the desired temperature.
Choose a constant temperature for the constant temperature stage:
1. Set temperature: Press the SET key to set or view the temperature set point. Press the SET key once and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state. After the temperature setting is completed, the heating indicator light will start to light up.
2. Pre setting: Press the SET button for 3 seconds to enter the inner layer parameter setting state of the instrument. The parameter that appears and flashes is the advance amount that stops immediately. The advance amount parameter should be carefully adjusted to reduce temperature overshoot. When the instrument controls the heating output, it will cut off heating in advance. When the temperature drops below the advance amount, it will start heating again. The output (relay) will not work within the set value and advance amount range. This can reduce the number of relay actions and extend the service life of the relay. Example: If the set value is 50.0 ℃, the advance amount is 0.5, and the instrument control heats up to 49.5 ℃, the relay releases and the temperature drops to 50.0 ℃
