About gas detectors are mainly instruments for detecting gas leakage in industrial places and preventing people from being poisoned or corporate property losses. Gas detectors are divided into two types, portable gas detectors and fixed gas detectors. Gas detectors used in different workplaces The gas detectors are also different, and portable gas detectors are also common in the working process. The following editor summarizes the reasons and advantages of choosing a portable gas detector in the industrial process.
First: Small size, easy to carry Portable gas detectors with good quality and low price are usually small in size, so they are very convenient to carry and can be turned on and used at any time. In addition, high-quality portable gas detectors mainly use high-performance sensors, and high sensitivity is its most significant feature. This portable gas detector can visually display the gas concentration on site, and the standby time is longer than other products of the same type.
Second: No need to set parameters for power-on detection Testing site testing.
Third: Strong adaptability and wide application range. Portable gas detectors can also be used in places that people cannot enter or cannot reach. It can be equipped with an external pump, which avoids the danger of letting the staff detect first. , Using the design of the external pump extension pipe, it can be used in places such as cold rooms, refrigeration workshops, tunnels and other closed toxic gas leakage places. In addition, the portable gas detector also adopts a waterproof, dust-proof and explosion-proof design, and is equipped with a replaceable in-line gas sensing module, making it an ideal tool for safety detection on the job site today.
Fourth: Simple calibration steps Generally, professional portable gas detectors have the characteristics of simple calibration steps. During the detection process, the technician only needs to use the magnetic programming tool to start the calibration process. The detector will automatically start calibration as soon as the gas is supplied, and if the signal has started to be in a relatively stable state, the combustible gas detector will record the initial data and prompt the technician to disconnect the gas source.
