What are the functional characteristics of the dual-purpose coating thickness gauge
The dual-purpose coating thickness gauge is a split sensor coating thickness gauge, which is suitable for measurement in narrow spaces. The top of the probe is made of very wear-resistant hard material, which greatly prolongs the service life.
Functions of dual-purpose coating thickness gauge:
Both magnetic and eddy current thickness measurement methods are used, which can measure the thickness of the non-magnetic coating on the magnetic metal substrate and the thickness of the non-conductive coating on the non-magnetic metal substrate;
Can quickly and automatically identify ferrous substrates and non-ferrous substrates;
The instrument can be calibrated by two methods of single-point calibration and two-point calibration;
The basic calibration correction method can be used to update and correct the error of the probe system to ensure the accuracy of the instrument during the measurement process;
Negative number display function ensures the accuracy of instrument zero point calibration and improves test accuracy;
There is a buzzer prompt during the operation;
Two shutdown methods: manual shutdown and automatic shutdown;
Battery voltage indication: low voltage prompt;
Micro power consumption design, the current in standby state is less than 10 microamps;
Measurement method: F magnetic induction NF eddy current.
Dual purpose coating thickness gauge characteristics
One-handed operation, easy to use:
Simply place the instrument on the workpiece to see the measurement reading.
Ergonomically designed double-sided backlit display panel allows readings to be seen from any measurement position
Built-in dual-function measuring probe, suspension spring, maintain constant pressure and low contact pressure
Auto switch function
Measurements can be made without calibration.
Functions are quickly selected through easy-to-use menus.
Upper and lower limits can be set
If the measurement result exceeds or meets the upper and lower limit settings, the instrument will emit different sounds and flashing lights to prompt.
Automatic selection of measurement method - electromagnetic field induction or eddy current induction.
When there is no battery, it can still store 1000 data.
Radio transmits readings directly to an EXCEL sheet. For better reception, the receiver can be externally connected to the computer via RS232 cable.
The Pocket Coating Thickness Gauge uses ferrous and non-ferrous probes, which can automatically identify the probes according to the substrate.
