When cleaning the four-in-one gas detector, what particulars need to be taken care of?
As we all know, the four-in-one gas detector is a composite gas detector, which can detect multiple gases and display the numerical index of four gases or one gas at the same time. When it is detected that a certain gas index is within the alarm range, the instrument will automatically perform a series of alarm actions, such as flashing light, vibration and sound. However, after using the four-in-one gas detector for a long period of time, we all need to clean it. So what details should be paid attention to when cleaning the four-in-one gas detector?
Pay attention to the following details when cleaning the 4-in-1 gas detector:
1. When cleaning the 4-in-1 gas detector, in order to prevent the impact of the cleaning agent on the sensor, you need to consult relevant professionals for guidance in general cleaning work, or suggest that you use a mild soap box soft cloth for cleaning, and avoid introducing too much liquid into the sensor.
2. To avoid the short-term response of the four-in-one gas detector caused by the alcohol in the cleaning product, Yiyuntian recommends that you turn off the gas detector before cleaning it, and turn on the gas detector until the alcohol is completely volatilized. It should be noted that cleaning agents containing silicone and chlorine are prohibited, especially when cleaning detectors containing catalytic combustion gas sensors, because they may poison the sensors and cause them to permanently lose their sensitivity.
3. Regarding the pollution problem of the calibration of the four-in-one gas detector, Yiyuntian recommends that you regularly use the target gas to perform a ventilation test calibration on the detector to ensure that the gas sensor is working normally.
To sum up, some details should be paid attention to when cleaning the four-in-one gas detector. The cleaning work of the four-in-one gas detector actually contains a lot of knowledge. We only need to clean the four-in-one gas detector regularly to better maintain the performance and service life of the four-in-one gas detector.
