Digital Color LCD Socket Detector

GVDA GD101B Socket Tester Outlet Tester RCD GFCI NCV Test Outlet checker EU US UK Plug Ground Zero Line 30mA Smart Socket Detector

Warning: Please read the instruction manual carefully before use, and strictly abide by the safety rules and the caution, attention, warning and other matters listed in the instruction manual. To avoid possible electric shock or personal injury:

· Before use, please check the tester carefully to confirm whether it is damaged, if it is damaged, please stop it immediately

Stop using it and send it in for repair.

· To test whether the tester is correct, plug the tester into a known correct socket to test.Check that the test function is correct and use it later.

· When testing the switch detection, it can only be used normally if the wiring is correct.

· When testing the leakage switch, please turn off the equipment on the power line to ensure that the power failure will not cause any harm. When testing in public places, the test must be approved.

· When using, if the socket wiring error is detected, please ask a professional electrician to repair the wiring.

 

Specifications; 

Measurement of zero-live voltage (L-N): 30-250V/(50-60HZ)
Measurement of zero-earth voltage (N-E): 0.1–10 V/(50–60 HZ)
Working conditions: 0°C to 40°C and 20°C to 70°C of humidity
The storage environment10°C to 50°C with 20°C to 80°C humidity
Current of RCD: >30mA

RCD Voltage at work: 220V ± 20V
Battery: 2 x AAA

Weight: 84g;

Weight of package: 107g

GVDA GD101B is EU Plug Socket Tester with Color LCD Display

High definition display allows for cear display of screen values in the dark environments

Flame Retardant and Impact Resistant Shell

Six Test status analysis show

1.Wire is corect
2.Missing zeo line
3.Missing ground
4.Fire gound reserse
5.Fire zero reserse
6.Mismatch and lack of land

2pcs 1.5V AAA Batteries

Battery was not included

Product Introduction

Wide Applications

It is widely used in fire protection, safety supervision, home improvement, laboratory, factory and home line inspection and maintenance.

Special attention：

1. The normal voltage range of zero fire line is plus or minus 10% of the local standard voltage. If it is too high or too low, it may be because the circuit load is too high or the power supply is too low / too high.

2. The normal voltage of zero-earth wire is less than 2V, if too high maybe it is because there is current leakage, or the three phase-sequence is out of balance or there is signal interference in the circuit.

Hot Tags: Digital Color LCD Socket Detector, China, suppliers, manufacturers, factory, customized, wholesale, best, low price, in stock, buy discount, electric socket tester, Socket Detector Tester Ground Zero Line, Socket Detector, gfci outlet tester, megger rcd tester, UK Plug Socket Tester 240v