Maintenance of digital microscope
Use environment:
It must be placed in a clean and clean place to avoid abnormal phenomena caused by dust, or non-working phenomenon caused by oil pollution; the brightness should be moderate and not exceed the necessary brightness, otherwise it will have a negative impact on work or eyes.
The digital microscope should be placed in a place where there is little vibration and the temperature does not change drastically. Like a computer host, vibration has a great impact on digital microscopes. If the core components are damaged, almost the entire equipment will be scrapped. Choose a place where the temperature will not fluctuate greatly, otherwise it will also have a negative impact on the equipment, and there will be a large error in the experimental results.
The protection of each part:
The lens must not be touched with your hands. Otherwise, there will be large errors in the results. If it gets dirty, be sure to use a professional lens cleaner or wipe it with alcohol when the power is turned off.
Electrical parts:
Digital microscopes have relatively high requirements on voltage and current, so the wiring must pass the test, otherwise it is easy to generate heat and easy to cause danger. The digital microscope with strict requirements must be grounded, which solves the problem of static electricity and avoids the impact danger caused by current and voltage.
Light bulbs and fuses:
This belongs to the consumables that must be adequately prepared, and do not appear at work, when problems occur and cannot be solved in time.
