Problems that are prone to occur with trace moisture measuring instruments
As a commonly used and practical instrument, the trace moisture analyzer may malfunction over time. So, how can these faults be resolved in a timely manner when faced with sudden malfunctions?
Below is a brief summary of several common problems that users may encounter when using a trace moisture analyzer, along with some simple solutions:
Firstly, the trace moisture analyzer still displays a black screen after being turned on. The common problems that occur in this situation are whether there is no voltage, whether the power cord is not connected, whether the fuse is blown, and so on. After conducting these routine simple checks, it is found that the trace moisture analyzer still cannot be turned on. Therefore, it is necessary to check whether the instrument is damaged. If the instrument really malfunctions, it needs to be returned to the factory for repair.
Secondly, the measurement time of the trace moisture analyzer is too long. Many trace moisture testers do not test as quickly as users think. How could this trace moisture tester have such a situation? In fact, users do not need to panic because it is highly likely that they have chosen an inappropriate shutdown mode, and only need to switch to a more suitable shutdown mode.
Finally, there is the poor repeatability of the trace moisture analyzer. Many users pay special attention to this issue when purchasing the trace moisture analyzer. In fact, it is very likely that the sample is uneven and the selection of drying time is too short, resulting in simple problems such as not drying the sample, which is not as big a problem as users think. Therefore, simply solve it.
