What are the auxiliary materials and tools for electric soldering iron
1. Solder
Solder with a low melting point is mainly made of tin-based alloys.
2. Flux
Rosin is the most commonly used flux. Flux can help remove oxides on the metal surface, which is beneficial to soldering and protects the tip of the soldering iron.
What are the auxiliary materials and tools for electric soldering iron
3. Auxiliary tools for welding
Auxiliary tools are generally used when fixing or removing small components. The most commonly used ones are inserts, and there are also needle-nose pliers and partial-nose pliers.
Precautions when using the electric soldering iron:
1. When buying a new electric soldering iron, it is best to buy a three-pole plug. The electric soldering iron with a grounding function is safer to use. After all, the electric soldering iron is connected to 220V AC voltage, and you must pay attention to the safety of electricity use.
2. Before use, you must carefully check to confirm that the power plug and power cord are not damaged, and check whether the soldering iron tip is loose. When the above problems are found, it should be used after troubleshooting.
3. During use, do not move the tip of the soldering iron over others to avoid danger. When there is too much solder on the tip of the soldering iron, it can be wiped off with a cloth, and must not be thrown away, so as not to burn yourself or others. Do not place the electric soldering iron indiscriminately to prevent the high temperature from igniting flammable materials. Be careful not to touch the tip of the soldering iron to the power cord to avoid danger.
4. After use, the power supply should be cut off in time, and the electric soldering iron should be taken back after the tip of the soldering iron cools down.
