What are the types of gas detectors and methane sensor modules that can be divided into?
The selection of gas detectors should be based on the type of gas generated by the wastewater treatment plant, and gas detectors are also divided into fixed and portable types. The sewage treatment plant can combine portable and fixed gas detection equipment during installation. According to some common toxic gases, flammable and explosive gases in sewage treatment plants, corresponding gas detectors have been installed, such as methane gas detectors, combustible gas alarms, carbon dioxide alarms, etc.
Harmful combustible gas alarm is a safety equipment required by the safety inspection department to be installed. Especially in the past two years, after strict environmental inspections, the requirements for safety equipment have become higher. The development and production of combustible gas alarms in China began many years ago, but the important combustible gas sensor components still rely on foreign technology, and sensors are the core components of combustible gas alarms. In order to ensure the normal operation and monitoring accuracy of the equipment, it is still necessary to choose imported sensors. Technical engineers from the Industrial and Commercial Network recommend using TGS2610 and CGM6812. In addition, methane sensor modules can also be used for biogas concentration detection:
Japan Figaro Combustible Gas Sensor/Liquefied Petroleum Gas Sensor - TGS2610
The combustible gas sensor TGS2610 has high sensitivity to propane and butane, making it a good LPG monitor. Due to its low sensitivity to volatile alcohol (a common interfering gas in residential environments), it is an ideal sensor for gas leakage alarms.
Japan FIGARO Combustible Gas Pre Calibration Module - CGM6812-B00
The pre calibration module CGM6812-B00 for combustible gas sensors is a new module equipped with the TGS6812 catalytic combustion combustible gas sensor, which has the characteristics of good durability and high stability.
Japan Figaro methane gas pre calibration module - FSM-T-01
FSM-T-01 is a pre calibration module for methane gas alarms. This module uses a TGS2611 sensor combined with an optimized classic circuit to measure methane gas concentration. It is pre calibrated using high-precision calibration equipment from Figaro and produced using mature aging technology. The design of this module aims to greatly save development and production costs for users, making it easier and simpler for them to manufacture civilian natural gas alarms.
