Introduction to related functions of digital microscope
There are six major differences between digital microscopes and ordinary microscopes:
1. With the function of microscopic photography, the observed microscopic effects are saved and formed into graphic files, which can be circulated to relevant departments; ordinary microscopes can only be observed through the eyepiece, and cannot be used for microscopic photography.
2. Connected with a computer, multiple people can observe at the same time; ordinary microscopes can only be observed by one person.
3. Previewing on the computer screen can reduce eye fatigue; ordinary microscopes need to observe through the eyepieces all the time, which can easily cause excessive eye fatigue.
4. The imaging device of the digital microscope can have functions such as measurement, printing of graphic reports, and video recording; ordinary microscopes can only perform microscopic observation.
5. Digital microscope is a new era in the development of modern scientific instruments and meters, and has many functions that ordinary microscopes do not have. It has developed rapidly in scientific research, product testing, teaching demonstration, archaeology, etc.
6. Appearance picture of digital microscope
how to use
1. Before using the USB digital microscope, the driver and the corresponding V1.0U image viewing software should be installed first.
2. Connect the digital microscope to the computer, then run Vibao1.0U software, select "Device" and then select "usb point 2.0 v130 camera" menu "Dynamic Video" to start imaging.
3. In the menu "Options" "Video capture pin...", the output size can choose the size of the output video you want;
4. In the menu "Options" "Video capture filter video proc Amp", you can adjust the brightness, contrast and saturation of the image by yourself.
5. If the imaging light is relatively bright. You can put a piece of white paper first and adjust the focus. In the menu "Options", "Video capturefilter Video Image", remove the check in front of White Balance Auto, remove the check in front of Exposere time AUTO and Dark Area. This imaging mode is manual horizontal mode, and the imaging system will automatically adjust the light. Then put the object to be detected on the stage.
features
Digital microscopes can produce upright three-dimensional images when observing objects. It has a strong stereoscopic effect, clear and wide imaging, and has a long working distance, and it is a conventional microscope with a very wide range of applications. It is easy to operate, intuitive, and has high verification efficiency. For example, 3R's A200 digital microscope is suitable for inspection of electronic industry production lines, verification of printed circuit boards, verification of soldering defects (printing misalignment, edge collapse, etc.) in printed circuit components, Verification of single-board PC, verification of vacuum fluorescent display VFD, and identification of printed grids, calligraphy and paintings, etc., it will enlarge the image of the real object and display it on the computer screen, and can save and enlarge the picture. Print. Equipped with measurement software, various data can be measured.
