Microscope use "Precautions":
1. Strictly avoid using a single handed extraction microscope.
2. If it is necessary to move the microscope, be sure to lift it up and place it in the appropriate position, and avoid pushing the microscope (causing damage when pushing)
The vibration may cause the internal parts of the microscope to loosen, remember!!), Please handle the microscope with care.
3. When using a microscope, the height of the chair should be appropriate, and it is recommended to observe both eyes simultaneously with a bright aperture and light source
The degree should be appropriate, otherwise it is easy to feel fatigue when observed for a long time.
4. When rotating the rotating disc, be sure to lower the stage to the lowest point to avoid scratching the lens of the eyepiece due to improper operation.
5. The slide should be removed for specimen staining or any other operation, and after the operation is completed, it should be placed back on the stage for observation. Do not use it on the slide
Operate on the stage to prevent dyes or other liquids from entering the microscope or damaging the lens.
6. After observing one material and wanting to replace it with another, be sure to lower the stage to the lowest point and replace the glass slide
Refocus according to standard procedures and do not directly replace the specimen to avoid scratching the lens or slide specimen.
7. When using a microscope, the stage should be lowered to the lowest point and the low magnification mirror should be aligned with the central circular hole of the stage. The power cord should be wound up, covered with a dust cover, and stored in a cabinet
